10x10 Concrete Pad Cost
A 10x10 concrete pad covers 100 square feet. A basic slab planning range is $400–$800, while a typical full installation is about $600–$1,200. Contractor minimums and site conditions matter on a project this small.
10x10 Cost at a Glance
A simple square-foot reference for a small pad.
A common planning thickness for light flatwork.
Area-only planning range before site work.
A fuller scope with ordinary materials and labor.
A 6-inch 10x10 slab uses 50% more concrete than a 4-inch slab, which is why thickness matters even on a small pad.
10x10 Cost Breakdown
Concrete Material
At 4 inches, the calculated 1.23 yd³ costs about $160–$220 at a $130–$180 per-yard material range, before delivery fees or extra material.
Labor and Site Preparation
Layout, excavation, gravel, compaction, forms, placement, finishing, joints, and cleanup commonly cost more than ready-mix alone.
Reinforcement and Finish
Rebar, mesh, fiber, thickened edges, broom finish, color, stamping, or sealing change the scope and should be itemized.
Concrete Volume for a 10x10 Pad
| Thickness | Calculated volume | Before ordering |
|---|---|---|
| 4 inches | 1.23 yd³ | Common light-flatwork planning example |
| 5 inches | 1.54 yd³ | 25% more volume than 4 inches |
| 6 inches | 1.85 yd³ | 50% more volume than 4 inches |
Ask the supplier or contractor about waste allowance and minimum delivery quantities before ordering.
Shed, Patio, and Hot Tub Uses
Shed base
Confirm the building footprint, anchors, edge detail, drainage, and manufacturer requirements.
Small patio
Finish, slope, backyard access, furniture layout, and connection to the house affect the design.
Hot tub pad
A filled hot tub creates a concentrated heavy load. Use the manufacturer's requirements and qualified local design rather than a generic light-slab assumption.
Small Job Minimum Charges
A 10x10 pad is large enough to be useful but still small enough for minimum delivery and crew charges to matter. That is why local bids often differ from a simple square-foot calculation.
Evidence Cards
Typical installed pricing
- Used For
- Typical installed $6 to $12 per sq ft range and 10x10 / 12x12 / 20x20 examples
- Last Updated
- 2026-02-03
- Confidence
- High
Technical guidance
- Used For
- Slab terminology, joints, curing, and homeowner explanation
- Last Updated
- Accessed 2026-07-04
- Confidence
- High
Basic slab pricing
- Source
- Angi concrete slab guide
- Used For
- Basic $4 to $8 per sq ft slab range and quote comparison language
- Last Updated
- 2026-04-16
- Confidence
- High
Frequently Asked Questions
How much does a 10x10 concrete pad cost?
A 10x10 pad covers 100 square feet. A basic slab planning range is $400 to $800, while a typical full installation is about $600 to $1,200. Small-job minimums and added site work may produce a higher quote.
How many cubic yards are in a 10x10 concrete pad?
At 4 inches thick, a 10x10 pad has a calculated volume of about 1.23 cubic yards. At 5 inches it is about 1.54 cubic yards, and at 6 inches it is about 1.85 cubic yards, before any extra allowance.
Is a 10x10 concrete pad big enough for a shed?
It may suit a 10x10 or smaller shed, but foundation dimensions, edge clearance, anchors, drainage, and overhang requirements should come from the shed manufacturer and local rules.
Why might a 10x10 quote exceed $1,200?
Ready-mix short-load fees, crew minimums, excavation, gravel base, demolition, pumping, difficult access, reinforcement, thickened edges, finish, and permits can all raise a small project above the area-only estimate.
Sources and Methodology
The $600–$1,200 installed example follows HomeGuide's published 10x10 range. Material-only calculations use the site's documented ready-mix planning range.
HomeGuide concrete slab costsGet a Local Concrete Pad Estimate
Request a local estimate based on your project and location.